LowPro™ Low-Profile RMR Red Dot Mount for Ruger 10/22

• At only 3.5mm (0.14") thick, this is the lowest profile mount on the market and is less than half the thickness of alternative mounting plate options
• Made in the USA out of durable and lightweight PA12 nylon
• Alignment pins keep red dot secure and zeroed

• (1) LowPro™ RMR mounting plate
• (2) #6-48 x 1/4" flat head screws (T10 torx)
• (2) #6-32 x 10mm flat head screw (T10 torx)
• (1) Installation instructions card

Compatible firearms
Compatible with all Ruger 10/22 rifles with threaded holes on top of the receiver.

Compatible red dots
Compatible with any red dot that uses an RMR footprint including, but not limited to:

ADE Artemis
ADE Raptor
ADE Stingray
ADE Trumpet
ADE Valkyrie
AMERIGLO HAVEN
ARORY HD2417KFP
Athlon Midas Flash
Axeon MDPR1 Mini
Bushnell RXM-300
C&H Precision COMP
C&H Precision EDC-XL
CVLIFE WolfCloak
CVLIFE WolfCovert
Cyelee Bear
Cyelee Bull PRO
Cyelee Bull X PRO
Cyelee CT2
Cyelee Ghost HDG
Cyelee WOLF PRO
Cyelee WOLF X PRO
Cyelee Wolf0
Cyelee WOLF2
Foxarmy FXA10
Foxarmy FXA12
Foxarmy FXA12 PRO
Gideon Optics Alpha
Gideon Optics Granite Comp
Gideon Optics Omega
Gideon Optics Rock
Holosun 407A3 X2
Holosun 407C X2
Holosun 407C X3
Holosun 407COMP
Holosun 507 Pro Max
Holosun 507C X2
Holosun 507C X3
Holosun 507COMP
Holosun 508T X2
Lucid Optics LM2
Meprolight MPO Pro-DF
Meprolight MPO Pro-F
Meprolight MPO-F
Monstrum B.O.P.
Monstrum Nitro+
NcSTAR VISM FlipDot Pro
Osight C
Osight X
Osight XE
Osight XR
Primary Arms Classic Series 24mm
Primary Arms SLx RS-10R
Riton 3 Tactix MPRD 3
Riton 3 Tactix PRD 2
Riton 3 Tactix PRD 3
SECDES DEMON
SIG Sauer ROMEOZero-R
Swampfox Justice
Swampfox Kingslayer
Swampfox Liberty
Tacticon Predator V4
Trijicon RCR
Trijicon RMR
Trijicon RMR HD
Trijicon RMR Type 2
Trijicon SRO
TRUGLO TRU•TEC MICRO
TRUGLO XR24
TRUGLO XR29
UTG OP3 Micro for RMR
UTG OP3 Micro SLS for RMR
UUQ EagleC28
UUQ HD1079
Viridian RFX35
Viridian RFX45
VOTATU PMD504-G
Zulisy OAK
Zulisy OAK Plus
Zulisy OAKc

Coming soon

Q: Why are the mounts made out of PA12 nylon instead of aluminum?
A: PA12 nylon is an engineering-grade thermoplastic with high strength, impact resistance, wear resistance, chemical resistance, and dimensional accuracy. It is also low cost which is what allows me to keep the price low. PA12 nylon is sufficiently strong for rimfire firearms, especially the Ruger Mark I/II/III/IV pistol because the red dot is mounted to a barrel that doesn’t reciprocate.

Q: Is the mount durable and will it hold zero?
A: Yes, LowPro mounts are very durable and will hold zero long-term. They are used by many competitive shooters who shoot tens of thousands of rounds annually.

Q: How are the mounts made?
A: The mounts are additively manufactured on an industrial-grade 3D printer. The strength, quality, and surface finish is comparable to injection-molding.

Q: Where are the mounts made?
A: The mounts are designed by me, a mechanical engineer, and manufactured in Michigan.

Q: Where do the mounts ship from?
A: The mounts ship from my home in Atlanta, GA